|| POWDER SAMPLERS |
These powder samplers with interchangeable dies for unit-dose sampling
are available in different diameters, lengths and models. Made of 316 stainless steel, these samplers may have one sample port or multiple sample ports for
simultaneous sampling at several locations. Any number of sample ports may be blocked with blank dies.
Single, duplicate or triplicate sampling at each sample port is possible. Duplicate and triplicate samples are obtained from exactly the same spot at each
sample port with just one insertion of the sampler into the powder bed. Segmented design samplers facilitate sampling from large blenders with roof height
limitation. Stainless steel inner shaft is hollow to make the sampler lighter. Inner shafts, custom-made of Teflon ( FDA approved white plastics),
are available. The samplers are passivated and easily cleanable with movable conical end pieces.