HOME PRODUCTS CONTACT ENQUIRY SITE MAP WHITE PAPERS
Sanitary Stainless Steel Piping
Sanitary Stainless Steel Fittings
Sanitary Stainless Steel Valves
Sanitary Split Butterfly Valves
Sanitary Stainless Steel Pumps
Sanitary Stainless Steel Filters
PW/WFI Distribution Loops
Clean Room Accessories
Stainless Steel Drains
Pendents ((Service Shafts)
Hand Sanitiser
Shoe Cover Dispenser
Clean Room Furniture
Cleaning/Sanitising Systems
Spray Balls (Self Rotating)
Turbojet Tank/Agitator Cleaner
Cleaning Nozzles
Water Saver Nozzle
Hose Down Wash Station
CIP / SIP Modules
SIP Modules
Glass Flask Washing Station
Crates Washing Station
Drum Washing Station
IBC Washing Station
FBD Bags Washing Station
Pigging System
New Product Launch
Top Reactor Sampler

PIGGING SYSTEM
Removal and recovery of valuable product, from process pipe lines as well as expediting cleaning is an extremely important process. The most effective way to accomplish these tasks is with Industrial Equipwash Inc. Product Recovery System. When viscous products (creams, pastes, ointments) are pumped through tubing in a process system, a certain amount of product will be left behind. Residual will either dilute or leave large deposits attached to the inside wall of the tubing. While water and air are often used to remove this residual, these methods only work to a certain degree. The IEWI Product Recovery System works on a simple, yet extremely effective, principle. Our product recovery system consists of a launcher, a catcher and a pig (one-piece, solid molded urethane projectile). Prior to start-up, the pig is placed in the launcher located in the pipeline and just down stream from the pump. Once the run is completed, air pressure is applied to the pig to push it through the main pipeline, forcing the remaining product to a recovery point at the end of the pipeline. The projectile travels through standard 90 elbows until it reaches the catcher, and then the propulsion
DOWN LOAD PDF CATALOGUE